manualshive.com logo in svg

Cisco 6500 - Catalyst Series 10 Gigabit EN Interface Module Expansion, Configuration Manual, Page: 202 / 742

Share
Download
Cisco 6500 - Catalyst Series 10 Gigabit EN Interface Module Expansion Configuration Manual Download Page 202

 

10-10

Catalyst 6500 Series Switch and Cisco 7600 Series Router Firewall Services Module Configuration Guide using ASDM

OL-20748-01

Chapter 10      Configuring IPv6

  Configuring a Static IPv6 Neighbor

Suppressing Router Advertisement Messages

By default, Router Advertisement messages are automatically sent in response to router solicitation 
messages. You may want to disable these messages on any interface for which you do not want FWSM 
to supply the IPv6 prefix (for example, the outside interface).

To suppress IPv6 router advertisement transmissions on an interface, enter the following command:

hostname(config-if)# 

ipv6 nd suppress-ra

Configuring a Static IPv6 Neighbor

You can manually define a neighbor in the IPv6 neighbor cache. If an entry for the specified IPv6 address 
already exists in the neighbor discovery cache—learned through the IPv6 neighbor discovery 
process—the entry is automatically converted to a static entry. Static entries in the IPv6 neighbor 
discovery cache are not modified by the neighbor discovery process.

To configure a static entry in the IPv6 neighbor discovery cache, enter the following command: 

hostname(config-if)# 

ipv6 neighbor 

ipv6_address

 

if_name

 

mac_address

 

The

 ipv6_address

 argument is the link-local IPv6 address of the neighbor, the 

if_name

 argument is the 

interface through which the neighbor is available, and the 

mac_address

 argument is the MAC address of 

the neighbor interface.

Note

The 

clear ipv6 neighbors

 command does not remove static entries from the IPv6 neighbor discovery 

cache.

Verifying the IPv6 Configuration

This section describes how to verify your IPv6 configuration. You can use various show commands to 
verify your IPv6 settings. 

This section includes the following topics:

•

Viewing IPv6 Interface Settings, page 10-10

•

Viewing IPv6 Routes, page 10-11

Viewing IPv6 Interface Settings

To display the IPv6 interface settings, enter the following command:

hostname# 

show ipv6 interface

 [

if_name

]

Including the interface name, such as “outside”, displays the settings for the specified interface. 
Excluding the name from the command displays the setting for all interfaces that have IPv6 enabled on 
them. The output for the command shows the following:

•

The name and status of the interface.

•

The link-local and global unicast addresses.

Summary of Contents for 6500 - Catalyst Series 10 Gigabit EN Interface Module Expansion







































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments