manualshive.com logo in svg

Cisco 6500 - Catalyst Series 10 Gigabit EN Interface Module Expansion, Configuration Manual, Page: 432 / 742

Share
Download
Cisco 6500 - Catalyst Series 10 Gigabit EN Interface Module Expansion Configuration Manual Download Page 432

 

22-16

Catalyst 6500 Series Switch and Cisco 7600 Series Router Firewall Services Module Configuration Guide using ASDM

OL-20748-01

Chapter 22      Applying Application Layer Protocol Inspection

  DCERPC Inspection

E - outside back connection, F - outside FIN, f - inside FIN,

G - group, g - MGCP, H - H.323, h - H.225.0, I - inbound data,

i - incomplete, J - GTP, j - GTP data, k - Skinny media,

M - SMTP data, m - SIP media, O - outbound data, P - inside back connection,

q - SQL*Net data, R - outside acknowledged FIN,

R - UDP SUNRPC, r - inside acknowledged FIN, S - awaiting inside SYN,

s - awaiting outside SYN, T - SIP, t - SIP transient, U - up

Network Processor 1 connection

TCP out 10.0.0.101:2748 in 10.0.0.23:3598 idle 0:00:09 Bytes 103065 FLAGS - UOI

UDP out 10.0.0.21:30504 in 10.0.0.23:3650 idle 0:00:00 Bytes 4810406 

 FLAGS - C

UDP out 10.0.0.21:1436 in 10.0.0.23:19972 idle 0:00:00 Bytes 4813240 

 FLAGS - C

TCP out 10.0.0.21:1437 in 10.0.0.23:1720 idle 0:07:04 Bytes 1027 FLAGS - UBOIh

UDP out 10.0.0.21:49608 in 10.0.0.23:49608 idle 0:00:10 Bytes 241836 

 FLAGS - H

UDP out 10.0.0.21:49609 in 10.0.0.23:49609 idle 0:00:01 Bytes 17480 

 FLAGS - H

TCP out 10.0.0.21:1440 in 10.0.0.23:1503 idle 0:06:58 Bytes 4488 FLAGS - UBOI

TCP out 10.0.0.21:1441 in 10.0.0.23:1503 idle 0:04:50 Bytes 17888 FLAGS - UBOI

TCP out 10.0.0.21:1442 in 10.0.0.23:1503 idle 0:04:50 Bytes 471135 FLAGS - UBOI

 Network Processor 2 connections 

Multicast sessions:

 Network Processor 1 connections 

 Network Processor 2 connections 

IPv6 connections:

DCERPC Inspection

DCERPC is a protocol widely used by Microsoft distributed client and server applications that allows 
software clients to execute programs on a server remotely. 

This typically involves a client querying a server called the Endpoint Mapper listening on a well known 
port number for the dynamically allocated network information of a required service. The client then sets 
up a secondary connection to the server instance providing the service. The security appliance allows the 
appropriate port number and network address and also applies NAT, if needed, for the secondary 
connection.

DCERPC inspect maps inspect for native TCP communication between the EPM and client on well 
known TCP port 135. Map and lookup operations of the EPM are supported for clients. Client and server 
can be located in any security zone. The embedded server IP address and Port number are received from 
the applicable EPM response messages. Since a client may attempt multiple connections to the server 
port returned by EPM, multiple use of pinholes are allowed, which have user configurable timeouts.

Note

DCERPC inspection only supports communication between the EPM and clients to open pinholes 
through the FWSM. Clients using RPC communication that does not use the EPM is not supported with 
DCERPC inspection. 

DCERPC inspection supports the following messages: 

•

End point mapper (EPMAP)

•

RemoteCreateInstance

•

Any message that does not contain an IP address or port information because these messages do not 
require inspection

Summary of Contents for 6500 - Catalyst Series 10 Gigabit EN Interface Module Expansion







































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments