manualshive.com logo in svg

Cisco 6500 - Catalyst Series 10 Gigabit EN Interface Module Expansion, Configuration Manual, Page: 586 / 742

Share
Download
Cisco 6500 - Catalyst Series 10 Gigabit EN Interface Module Expansion Configuration Manual Download Page 586

 

25-20

Catalyst 6500 Series Switch and Cisco 7600 Series Router Firewall Services Module Configuration Guide using ASDM

OL-20748-01

Chapter 25      Monitoring the Firewall Services Module

  Configuring SNMP

Severity Levels

Table 25-2

 lists the syslog message severity levels.

Note

The security appliance does not generate syslog messages with a severity level of 0 (emergency). This 
level is provided in the 

logging

 command for compatibility with the UNIX system log feature, but is not 

used by the security appliance.

Configuring SNMP

This section describes how to configure SNMP, but does not provide comprehensive information about 
all SNMP MIBs and traps. For detailed MIB and event notification information, see 

Appendix D, 

“Mapping MIBs to CLI Commands.”

It includes the following topics:

•

SNMP Overview, page 25-20

•

Enabling SNMP, page 25-32

SNMP Overview

The FWSM provides support for network monitoring using SNMP V1 and V2c. The FWSM supports 
traps and SNMP read access, but does not support SNMP write access.

You can configure the FWSM to send traps (event notifications) to a network management station 
(NMS), or you can use the NMS to browse the MIBs on the FWSM. MIBs are a collection of definitions, 
and the FWSM maintains a database of values for each definition. Browsing a MIB entails issuing an 
SNMP get request from the NMS. Use CiscoWorks for Windows or any other SNMP V1 or V2C, 
MIB-II-compliant browser to receive SNMP traps and browse a MIB.

Table 25-3

 lists supported MIBs and traps for the FWSM and, in multiple mode, for each context. You 

can download Cisco MIBs from the following website.

http://www.cisco.com/public/sw-center/netmgmt/cmtk/mibs.shtml

After you download the MIBs, compile them for your NMS.

Table 25-2

Syslog Message Severity Levels

Level Number

Level Keyword

Description

0

emergency

System unusable.

1

alert

Immediate action needed.

2

critical

Critical condition.

3

error

Error condition.

4

warning

Warning condition.

5

notification

Normal but significant condition.

6

informational

Informational message only.

7

debugging

Appears during debugging only.

Summary of Contents for 6500 - Catalyst Series 10 Gigabit EN Interface Module Expansion







































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments