manualshive.com logo in svg

Cisco 6500 - Catalyst Series 10 Gigabit EN Interface Module Expansion, Configuration Manual, Page: 351 / 742

Share
Download
Cisco 6500 - Catalyst Series 10 Gigabit EN Interface Module Expansion Configuration Manual Download Page 351

 

17-7

Catalyst 6500 Series Switch and Cisco 7600 Series Router Firewall Services Module Configuration Guide using ASDM

OL-20748-01

Chapter 17      Applying AAA for Network Access

  Configuring Authentication for Network Access

Figure 17-1

Authentication Proxy Login Page

Note

The Cisco Systems text field shown in this example was customized using the 

auth-prompt

 command. 

See the 

“Configuring Custom Login Prompts” section on page 17-5

.

After the user enters a valid username and password, an “Authentication Successful” page appears and 
closes automatically. If the user fails to enter a valid username and password, an “Authentication Failed” 
page appears.

Secured web-client authentication has the following limitations:

•

A maximum of 128 concurrent HTTPS authentication sessions are allowed. If all 128 HTTPS 
authentication processes are running, a new connection requiring authentication will not succeed.

•

When 

uauth timeout 0

 is configured (the 

uauth timeout

 is set to 0), HTTPS authentication might 

not work. If a browser initiates multiple TCP connections to load a web page after HTTPS 
authentication, the first connection is let through, but the subsequent connections trigger 
authentication. As a result, users are continuously presented with an authentication page, even if the 
correct username and password are entered each time. To work around this, set the 

uauth timeout

 

to 1 second with the 

timeout uauth 0:0:1

 command. However, this workaround opens a 1-second 

window of opportunity that might allow non-authenticated users to go through the firewall if they 
are coming from the same source IP address.

•

Because HTTPS authentication occurs on the SSL port 443, users must not configure an 

access-list

 

command statement to block traffic from the HTTP client to HTTP server on port 443. Furthermore, 
if static PAT is configured for web traffic on port 80, it must also be configured for the SSL port. In 
the following example, the first line configures static PAT for web traffic and the second line must 
be added to support the HTTPS authentication configuration.

static (inside,outside) tcp 10.132.16.200 www 10.130.16.10 www

Summary of Contents for 6500 - Catalyst Series 10 Gigabit EN Interface Module Expansion







































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments