manualshive.com logo in svg

Cisco 6500 - Catalyst Series 10 Gigabit EN Interface Module Expansion, Configuration Manual, Page: 553 / 742

Share
Download
Cisco 6500 - Catalyst Series 10 Gigabit EN Interface Module Expansion Configuration Manual Download Page 553

 

24-7

Catalyst 6500 Series Switch and Cisco 7600 Series Router Firewall Services Module Configuration Guide using ASDM

OL-20748-01

Chapter 24      Managing Software, Licenses, and Configurations

  Installing Application or ASDM Software

This address is the address for VLAN 1, which is the only VLAN used by the maintenance partition. 
Using an address in the 10.3.1.0/24 subnet for the maintenance partition IP address can cause 
communication problems with other hosts on that subnet; the FWSM uses 10.3.1.1 for internal 
diagnostics.

b.

To assign a default gateway to the maintenance partition, enter the following command:

root@localhost# 

ip gateway 

ip_address

c.

(Optional) To ping the FTP server to verify connectivity, enter the following command:

root@localhost# 

ping 

ftp_address

Step 9

To download the application software from the FTP server, enter the following command:

root@localhost# 

upgrade ftp://

[

user

[

:

password

]

@

]

server

[

/

path

]

/

filename 

cf:

{

4

 | 

5

}

cf:4

 and 

cf:5

 are the application partitions on the FWSM. Install the new software to the backup 

partition.

Follow the screen prompts during the upgrade.

Step 10

To log out of the maintenance partition, enter the following command:

root@localhost# 

logout

Step 11

To reboot the FWSM into the backup application partition (that you set as the default in 

Step 4

), enter 

the command for your operating system:

•

For Cisco IOS software, enter the following command:

Router# 

hw-module

 

module

 mod_num

 

reset

•

For Catalyst operating system software, enter the following command:

Console> (enable) 

reset

 

mod_num

Step 12

To session in to the FWSM, enter the command for your operating system:

•

Cisco IOS software

Router# 

session slot 

number

 processor 1

•

Catalyst operating system software

Console> (enable)

 session 

module_number

By default, the password to log in to the FWSM is 

cisco 

(set by the 

password

 command). If this partition 

does not have a startup configuration, the default password is used.

Step 13

Enter privileged EXEC mode using the following command:

hostname> 

enable

The default password is blank (set by the 

enable password

 command). If this partition does not have a 

startup configuration, the default password is used.

Step 14

Each application partition has its own startup configuration, so you might need to copy a current 
configuration to the application partition. If you have an old configuration running on this partition, you 
might want to clear it before copying to the running configuration. To clear the running configuration, 
enter the 

clear configure all 

command. To copy the configuration to the running configuration, use one 

of the following methods:

•

Paste the configuration at the command line.

•

To copy from a TFTP server, enter the following command:

Summary of Contents for 6500 - Catalyst Series 10 Gigabit EN Interface Module Expansion







































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments