Cisco 6500 - Catalyst Series 10 Gigabit EN Interface Module Expansion, Configuration Manual, Page: 82 / 742

4-18
Catalyst 6500 Series Switch and Cisco 7600 Series Router Firewall Services Module Configuration Guide using ASDM
OL-20748-01
Chapter 4 Configuring Security Contexts
Managing Memory for Rules
Note If you add a secondary unit at a later date, then after the new secondary unit synchronizes the
configuration, immediately reload the secondary unit so that the memory partitions are the same.
During the initial synchronization, the configuration might not fit properly in the secondary unit
memory partitions, but after reloading, and another configuration synchronization, the
secondary unit will be operational.
For example, if you have 4 partitions, and you want to reduce partitions 0 and 1 to 40000, while
increasing partitions 2 and 3 to 56616 and 56615 respectively, enter the following commands:
hostname(config)# show resource partition
Bootup Current
Partition Default Partition Configured
Number Size Size Size
-----------+---------+----------+-----------
0 49970 49970 49970
1 49969 49969 49969
2 49969 49969 49969
3 49969 49969 49969
backup tree 49970 49970 49970
-----------+---------+----------+-----------
Total 249847 249847 249847
Total Partition size - Configured size = Available to allocate
249847 - 249847 = 0
hostname(config)#
resource partition 0
hostname(config-partition)# size 40000
hostname(config-partition)# resource partition 1
hostname(config-partition)#
size 40000
hostname(config-partition)# show resource partition
Bootup Current
Partition Default Partition Configured
Number Size Size Size
-----------+---------+----------+-----------
0 49970 49970 40000
1 49969 49969 40000
2 49969 49969 49969
3 49969 49969 49969
backup tree 49970 49970 49969
-----------+---------+----------+-----------
Total 249847 249847 249847
Total Partition size - Configured size = Available to allocate
249847 - 229907 = 19940
hostname(config-partition)# resource partition 2
hostname(config-partition)# size 56616
hostname(config-partition)# resource partition 3
hostname(config-partition)# size 56615
hostname(config-partition)# show resource partition
Bootup Current
Partition Default Partition Configured
Number Size Size Size