manualshive.com logo in svg

Cisco 6500 - Catalyst Series 10 Gigabit EN Interface Module Expansion, Configuration Manual, Page: 355 / 742

Share
Download
Cisco 6500 - Catalyst Series 10 Gigabit EN Interface Module Expansion Configuration Manual Download Page 355

 

17-11

Catalyst 6500 Series Switch and Cisco 7600 Series Router Firewall Services Module Configuration Guide using ASDM

OL-20748-01

Chapter 17      Applying AAA for Network Access

  Configuring Authorization for Network Access

•

Configuring Any RADIUS Server for Downloadable Access Lists, page 17-12

Configuring Cisco Secure ACS for Downloadable Access Lists

You can configure downloadable access lists on Cisco Secure ACS as a shared profile component and 
then assign the access list to a group or to an individual user.

The access list definition consists of one or more FWSM commands that are similar to the extended 

access-list

 command, except without the following prefix:

access-list

 

acl_name

 

extended

The following example is a downloadable access list definition on Cisco Secure ACS Version 3.3:

+--------------------------------------------+

| Shared profile Components                  |

|                                            |

|      Downloadable IP ACLs Content          |

|                                            |

| Name:    acs_ten_acl                       |

|                                            |

|      ACL Definitions                       |

|                                            |

| permit tcp any host 10.0.0.254             |

| permit udp any host 10.0.0.254             |

| permit icmp any host 10.0.0.254            |

| permit tcp any host 10.0.0.253             |

| permit udp any host 10.0.0.253             |

| permit icmp any host 10.0.0.253            |

| permit tcp any host 10.0.0.252             |

| permit udp any host 10.0.0.252             |

| permit icmp any host 10.0.0.252            |

| permit ip any any                          |

+--------------------------------------------+

For more information about creating downloadable access lists and associating them with users, see the 
user guide for your version of Cisco Secure ACS.

On the FWSM, the downloaded access list has the following name:

#ACSACL#-ip-

acl_name

-

number

The 

acl_name

 argument is the name that is defined on Cisco Secure ACS (acs_ten_acl in the preceding 

example), and 

number

 is a unique version ID generated by Cisco Secure ACS.

The downloaded access list on the FWSM consists of the following lines:

access-list #ACSACL#-ip-xxx-acs_ten_acl-3b5385f7 permit tcp any host 10.0.0.254

access-list #ACSACL#-ip-xxx-acs_ten_acl-3b5385f7 permit udp any host 10.0.0.254

access-list #ACSACL#-ip-xxx-acs_ten_acl-3b5385f7 permit icmp any host 10.0.0.254

access-list #ACSACL#-ip-xxx-acs_ten_acl-3b5385f7 permit tcp any host 10.0.0.253

access-list #ACSACL#-ip-xxx-acs_ten_acl-3b5385f7 permit udp any host 10.0.0.253

access-list #ACSACL#-ip-xxx-acs_ten_acl-3b5385f7 permit icmp any host 10.0.0.253

access-list #ACSACL#-ip-xxx-acs_ten_acl-3b5385f7 permit tcp any host 10.0.0.252

access-list #ACSACL#-ip-xxx-acs_ten_acl-3b5385f7 permit udp any host 10.0.0.252

access-list #ACSACL#-ip-xxx-acs_ten_acl-3b5385f7 permit icmp any host 10.0.0.252

access-list #ACSACL#-ip-xxx-acs_ten_acl-3b5385f7 permit ip any any

Summary of Contents for 6500 - Catalyst Series 10 Gigabit EN Interface Module Expansion







































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments