manualshive.com logo in svg

Cisco 6500 - Catalyst Series 10 Gigabit EN Interface Module Expansion, Configuration Manual, Page: 560 / 742

Share
Download
Cisco 6500 - Catalyst Series 10 Gigabit EN Interface Module Expansion Configuration Manual Download Page 560

 

24-14

Catalyst 6500 Series Switch and Cisco 7600 Series Router Firewall Services Module Configuration Guide using ASDM

OL-20748-01

Chapter 24      Managing Software, Licenses, and Configurations

  Downloading and Backing Up Configuration Files

Step 3

To upgrade the maintenance partition software, enter one of the following commands for the appropriate 
download server.

For multiple context mode, you must be in the system execution space.

•

To download the maintenance software from a TFTP server, enter the following command:

hostname# 

upgrade-mp tftp

[

://

server

[

:

port

][

/

path

]

/

filename

]

You are prompted to confirm the server information, or if you do not supply it in the command, you 
can enter it at the prompts.

•

To download the maintenance software from an HTTP or HTTPS server, enter the following 
command:

hostname# 

upgrade-mp http

[

s

]

://

[

user

[

:

password

]

@

]

server

[

:

port

][

/

path

]

/

filename

Passwords for the root and guest accounts of the maintenance partition are retained after the upgrade.

Step 4

Reload the FWSM to load the new maintenance software by entering the following command:

hostname# 

reload

Alternatively, you can log out of the FWSM in preparation for booting in to the maintenance partition; 
from the maintenance partition, you can install application software to both application partitions. To 
end the FWSM session, enter the following command:

hostname# 

exit

Logoff

[Connection to 127.0.0.31 closed by foreign host]

Router#

You might need to enter the 

exit

 command multiple times if you are in a configuration mode.

See the 

“Installing Application Software from the Maintenance Partition” section on page 24-5

 to reload 

the FWSM into the maintenance partition.

The following example shows the prompts for the TFTP server information:

hostname# 

upgrade-mp tftp

Address or name of remote host [127.0.0.1]? 

10.1.1.5 

Source file name [cdisk]? 

mp.3-2-1-3.bin.gz

copying tftp://10.1.1.5/mp.3-2-1-3.bin.gz to flash

[yes|no|again]? 

yes

!!!!!!!!!!!!!!!!!!!!!!!

Received 1695744 bytes.

Maintenance partition upgraded.

Downloading and Backing Up Configuration Files

This section describes how to download and back up configuration files, and includes the following 
sections:

•

Viewing Files in Flash Memory, page 24-15

•

Downloading a Text Configuration to the Startup or Running Configuration, page 24-15

•

Downloading a Context Configuration to Disk, page 24-16

Summary of Contents for 6500 - Catalyst Series 10 Gigabit EN Interface Module Expansion







































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments