manualshive.com logo in svg

Cisco 6500 - Catalyst Series 10 Gigabit EN Interface Module Expansion, Configuration Manual, Page: 27 / 742

Share
Download
Cisco 6500 - Catalyst Series 10 Gigabit EN Interface Module Expansion Configuration Manual Download Page 27

 

xxvii

Catalyst 6500 Series Switch and Cisco 7600 Series Router Firewall Services Module Configuration Guide using ASDM

OL-20748-01

About This Guide

This preface describes the objectives and organization of this document and explains how to find 
additional information on related products and services. 

This preface includes the following sections:

•

Audience, page xxvii

•

Objectives, page xxvii

•

Document Conventions, page xxvii

•

Related Documentation, page xxviii

•

Obtaining Documentation and Submitting a Service Request, page xxix

Audience

This guide is for network managers who perform any of the following tasks: 

•

Managing network security

•

Installing and configuring firewalls

•

Managing default and static routes, and TCP and UDP services

Objectives

This document contains instructions and procedures for configuring the Firewall Services Module 
(FWSM), a single-width services module supported on the Catalyst 6500 switch and the Cisco 7600 
router, using the command-line interface. FWSM protects your network from unauthorized use. This 
guide does not cover every feature, but describes only the most common configuration scenarios.

You can also configure and monitor the FWSM by using ASDM, a web-based GUI application. ASDM 
includes configuration wizards to guide you through some common configuration scenarios, and online 
Help for less common scenarios. For more information, see:

http://www.cisco.com/en/US/products/ps6121/tsd_products_support_series_home.html

.

Document Conventions

The FWSM command syntax descriptions use the following conventions:

Summary of Contents for 6500 - Catalyst Series 10 Gigabit EN Interface Module Expansion







































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments