manualshive.com logo in svg

Cisco 6500 - Catalyst Series 10 Gigabit EN Interface Module Expansion, Configuration Manual, Page: 565 / 742

Share
Download
Cisco 6500 - Catalyst Series 10 Gigabit EN Interface Module Expansion Configuration Manual Download Page 565

 

24-19

Catalyst 6500 Series Switch and Cisco 7600 Series Router Firewall Services Module Configuration Guide using ASDM

OL-20748-01

Chapter 24      Managing Software, Licenses, and Configurations

  Configuring Auto Update Support

Step 2

(Optional) To identify the device ID to send when communicating with the AUS, enter the following 
command:

hostname(config)# 

auto-update device-id

 {

hardware-serial

 | 

hostname

 | 

ipaddress

 [

if-name

] 

| 

mac-address

 [

if-name

] | 

string

 

text

}

The device ID used is determined according to one of the following parameters:

•

hardware-serial

—Use the FWSM serial number.

•

hostname

—Use the FWSM hostname.

•

ipaddress

—Use the IP address of the specified interface. If the interface name is not specified, the 

device uses the IP address of the interface used to communicate with the AUS. 

•

mac-address

—Use the MAC address of the specified interface. If the interface name is not 

specified, the device uses the MAC address of the interface used to communicate with the AUS. 

•

string

—Use the specified text identifier, which cannot contain white space or the characters ‘, “, , 

>, & and ?.  

Step 3

(Optional) To specify how often to poll the AUS for configuration or image updates, enter the following 
command:

hostname(config)# 

auto-update poll-period

 

poll-period

 [

retry-count

 [

retry-period

]]

The 

poll-period

 argument specifies how often (in minutes) to check for an update. The default is 720 

minutes (12 hours).

The 

retry-count

 argument specifies how many times to try reconnecting to the server if the first attempt 

fails. The default is 0.

The 

retry-period

 argument specifies how long to wait (in minutes) between retries. The default is 5.

Step 4

(Optional) If the Auto Update Server has not been contacted for a certain period of time, the following 
command will cause it to cease passing traffic:

hostname(config)# 

auto-update timeout

 

period

Where 

period 

specifies the timeout period in minutes between 1 and 35791. The default is to never time 

out (0). To restore the default, enter the 

no

 form of this command.

Use this command to ensure that the FWSM has the most recent image and configuration. This condition 
is reported with system log message 201008. 

In the following example, a FWSM is configured to poll an AUS with IP address 209.165.200.224, at 
port number 1742, from the outside interface, with certificate verification.

The FWSM is also configured to use the hostname of the FWSM as the device ID, and the polling period 
has been decreased from the default of 720 minutes to 600 minutes. On a failed polling attempt, the 
FWSM will try to reconnect to the AUS 10 times, and wait 3 minutes between attempts at reconnecting.

hostname(config)# 

auto-update server 

https://jcrichton:[email protected]:1742/management source outside 

verify-certificate

hostname(config)# 

auto-update device-id

 

hostname

hostname(config)# 

auto-update poll-period 600 10 3

Summary of Contents for 6500 - Catalyst Series 10 Gigabit EN Interface Module Expansion







































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments