manualshive.com logo in svg

Cisco 6500 - Catalyst Series 10 Gigabit EN Interface Module Expansion, Configuration Manual, Page: 123 / 742

Share
Download
Cisco 6500 - Catalyst Series 10 Gigabit EN Interface Module Expansion Configuration Manual Download Page 123

 

5-17

Catalyst 6500 Series Switch and Cisco 7600 Series Router Firewall Services Module Configuration Guide using ASDM

OL-20748-01

Chapter 5      Configuring the Firewall Mode

  Setting Transparent or Routed Firewall Mode

Setting Transparent or Routed Firewall Mode

You can set each context to run in routed firewall mode (the default) or transparent firewall mode.

When you change modes, the FWSM clears the configuration because many commands are not 
supported for both modes. If you already have a populated configuration, be sure to back up your 
configuration before changing the mode; you can use this backup for reference when creating your new 
configuration.

If you download a text configuration to the FWSM that changes the mode with the 

firewall transparent 

command, be sure to put the command at the top of the configuration; the FWSM changes the mode as 
soon as it reads the command and then continues reading the configuration you downloaded. If the 
command is later in the configuration, the FWSM clears all the preceding lines in the configuration.

•

To set the mode to transparent, enter the following command in each context:

hostname(config)# 

firewall transparent

•

To set the mode to routed, enter the following command in each context:

hostname(config)# 

no firewall transparent

Summary of Contents for 6500 - Catalyst Series 10 Gigabit EN Interface Module Expansion







































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments