manualshive.com logo in svg

Cisco 6500 - Catalyst Series 10 Gigabit EN Interface Module Expansion, Configuration Manual, Page: 422 / 742

Share
Download
Cisco 6500 - Catalyst Series 10 Gigabit EN Interface Module Expansion Configuration Manual Download Page 422

 

22-6

Catalyst 6500 Series Switch and Cisco 7600 Series Router Firewall Services Module Configuration Guide using ASDM

OL-20748-01

Chapter 22      Applying Application Layer Protocol Inspection

  Configuring Application Inspection

The default policy configuration includes the following commands:

class-map inspection_default

 match default-inspection-traffic

policy-map global_policy

 class inspection_default

  inspect dns maximum-length 512

  inspect ftp

  inspect h323 h225

  inspect h323 ras

  inspect netbios

  inspect rsh

  inspect skinny

  inspect sqlnet

  inspect sunrpc

  inspect tftp

  inspect sip

  inspect xdmcp

service-policy global_policy global

Configuring Application Inspection

This feature uses Modular Policy Framework, so that implementing application inspection consists of 
the following:

1.

Identifying traffic.

2.

Applying inspections to the traffic.

For some applications, you can perform special actions when you enable inspection.

3.

Activating inspections on an interface.

SNMP

UDP/161, 
162

No NAT or PAT.

RFC 1155, 1157, 
1212, 1213, 1215

v.2 RFC 1902-1908; v.3 RFC 
2570-2580.

SQL*Net

TCP/1521 

—

—

v.1 and v.2.

SunRPC

UDP/111         
TCP/111

No PAT.

Payload not NATed.

—

The default class map includes UDP 
port 111; if you want to enable Sun RPC 
inspection for TCP port 111, you need 
to create a new class map that matches 
TCP port 111, add the class to the 
policy, and then apply the

 inspect 

sunrpc

 command to that class.

TFTP

TCP/69 
UDP/69

Payload not NATed.

RFC 1530

—

WAAS

TCP

—

—

Enables the TCP option 33 parsing.

XDCMP

UDP/177

No NAT or PAT.

—

—

1.

Inspection engines that are enabled by default for the default port are in bold.

2.

The FWSM is in compliance with these standards, but it does not enforce compliance on packets being inspected. For example, FTP commands are 
supposed to be in a particular order, but the FWSM does not enforce the order.

Table 22-1

Supported Application Inspection Engines (continued)

Application

1

Default Port NAT Limitations

Standards

2

Comments

Summary of Contents for 6500 - Catalyst Series 10 Gigabit EN Interface Module Expansion







































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments