manualshive.com logo in svg

Cisco 6500 - Catalyst Series 10 Gigabit EN Interface Module Expansion, Configuration Manual, Page: 137 / 742

Share
Download
Cisco 6500 - Catalyst Series 10 Gigabit EN Interface Module Expansion Configuration Manual Download Page 137

C H A P T E R

 

7-1

Catalyst 6500 Series Switch and Cisco 7600 Series Router Firewall Services Module Configuration Guide using ASDM

OL-20748-01

7

Configuring Basic Settings

This chapter describes how to configure basic settings on your FWSM that are typically required for a 
functioning configuration. This chapter includes the following sections:

•

Changing the Passwords, page 7-1

•

Setting the Hostname, page 7-3

•

Setting the Domain Name, page 7-4

•

Setting the Prompt, page 7-4

•

Configuring a Login Banner, page 7-5

Changing the Passwords

This section describes how to change the login and enable passwords and includes the following topics:

•

Changing the Login Password, page 7-1

•

Changing the Enable Password, page 7-2

•

Changing the Maintenance Software Passwords, page 7-2

Note

In multiple context mode, every context and the system execution space has its own login policies and 
passwords.

Changing the Login Password

The login password is used for sessions from the switch as well as Telnet and SSH connections. By 
default, the login password is “cisco.” To change the password, enter the following command:

hostname(config)# {

passwd

 | 

password

} 

password

You can enter 

passwd

 or 

password

. The 

password

 is a case-sensitive password of up to 16 alphanumeric 

and special characters. You can use any character in the password except a question mark or a space.

The password is saved in the configuration in encrypted form, so you cannot view the original password 
after you enter it. Use the 

no password

 command to restore the password to the default setting.

Summary of Contents for 6500 - Catalyst Series 10 Gigabit EN Interface Module Expansion







































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments