Cisco 6500 - Catalyst Series 10 Gigabit EN Interface Module Expansion, Configuration Manual, Page: 600 / 742

25-34
Catalyst 6500 Series Switch and Cisco 7600 Series Router Firewall Services Module Configuration Guide using ASDM
OL-20748-01
Chapter 25 Monitoring the Firewall Services Module
Configuring SNMP
•
start
• stop
Traps for nat include:
• packet-discard
Traps for remote-access include:
• session-threshold-exceeded
Traps for resource include:
• limit-reached
•
rate-limit-reached
Traps for cpu threshold include:
•
rising
To receive cpu threshold rising traps, the cpu threshold rising and monitoring values must be specified
by entering the following command:
hostname(config)# cpu threshold rising threshold_value monitoring level
Step 6
To enable syslog messages to be sent as traps to the NMS, enter the following command:
hostname(config)# logging history level
You must also enable syslog traps using the preceding snmp-server enable traps command.
Step 7
To enable logging and generate syslog messages, which can then be sent to an NMS, enter the following
command:
hostname(config)# logging enable
The following example sets the FWSM to receive requests from host 192.168.3.2 on the inside interface.
hostname(config)#
snmp-server host inside 192.168.3.2
hostname(config)# snmp-server location building 42
hostname(config)# snmp-server contact Pat lee
hostname(config)#
snmp-server community ohwhatakeyisthee