manualshive.com logo in svg

Cisco 6500 - Catalyst Series 10 Gigabit EN Interface Module Expansion, Configuration Manual, Page: 150 / 742

Share
Download
Cisco 6500 - Catalyst Series 10 Gigabit EN Interface Module Expansion Configuration Manual Download Page 150

 

8-8

Catalyst 6500 Series Switch and Cisco 7600 Series Router Firewall Services Module Configuration Guide using ASDM

OL-20748-01

Chapter 8      Configuring IP Routing and DHCP Services

  Configuring BGP Stub Routing

The 

as-number 

argument is the autonomous system number that identifies the FWSM to other BGP 

routers and tags the routing information passed along. It must be the same as the AS number of the BGP 
neighbor. After entering this command, the command prompt changes to

 hostname(config-router)#

 

to indicate that you are now in router configuration mode for the specified routing process.

Step 2

(Optional) Specify the router ID for the FWSM by entering the following command. If you do not enter 
a router ID, the highest IP address configured on the FWSM is used.

hostname(config-router)# 

bgp router-id

 

id

The 

id

 can be any IP address, including an IP address that is not configured on the FWSM. If this 

command is not specified, the router ID used is the highest IP address configured on the FWSM.

Step 3

Specify the BGP neighbor that BGP updates are sent to by entering the following command:

hostname(config-router)# 

neighbor

 

ip-addr

 

remote-as

 

as-number

The 

ip-addr

 argument is the IP address of the BGP neighbor. The 

as-number

 is the autonomous system 

number of the BGP neighbor. This should be the same as the AS number configured on the FWSM with 
the 

router

 command.

Step 4

(Optional) Enter the password used to authenticate the BGP message to the neighbor. This password 
must be set on both the neighbor and the FWSM before BGP messages can be exchanged.

hostname(config-router)# 

neighbor

 

ip-addr

 

password

 [

mode

] 

password

The

 ip-addr

 argument is the IP address of the BGP neighbor defined with the 

neighbor

 command. The 

mode

 argument can be from 0 to 7. If used, the BGP neighbor must use the same mode. The 

password

 

argument is an alphanumeric string that can contain keyboard symbols but cannot contain spaces.

Step 5

Specify the networks that the BGP routing process advertises using the 

network

 command. You can 

configure up to 200 network commands on the FWSM.

hostname(config-router)# 

network

 

ip-addr

 

mask 

mask

The BGP stub routing process only advertises static and directly-connected networks. The 

network

 

command defines which of those networks are advertised in BGP updates.

Monitoring BGP Stub Routing

You can use the following commands to display information about the BGP routing process, neighbor, 
and advertised routes. In multiple context mode, these commands are entered in the admin context.

•

To display information about the BGP routing process, enter the following command:

hostname# 

show ip bgp summary

•

To display BGP neighbor information, enter the following command:

hostname# 

show ip bgp neighbors

•

To display the routes advertised by the BGP routing process, enter the following command:

hostname# 

show ip bgp neighbors advertised-routes

•

To view debug messages for the BGP routing process, enter the following command:

hostname# 

debug ip bgp

Summary of Contents for 6500 - Catalyst Series 10 Gigabit EN Interface Module Expansion







































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments