manualshive.com logo in svg

Cisco 6500 - Catalyst Series 10 Gigabit EN Interface Module Expansion, Configuration Manual, Page: 497 / 742

Share
Download
Cisco 6500 - Catalyst Series 10 Gigabit EN Interface Module Expansion Configuration Manual Download Page 497

 

22-81

Catalyst 6500 Series Switch and Cisco 7600 Series Router Firewall Services Module Configuration Guide using ASDM

OL-20748-01

Chapter 22      Applying Application Layer Protocol Inspection

  SIP Inspection

hostname(config-pmap-p)# 

im

c.

To enable or disable IP address privacy, enter the following command:

hostname(config-pmap-p)# 

ip-address-privacy

d.

To enable check on Max-forwards header field being 0 (which cannot be 0 before reaching the 
destination), enter the following command:

hostname(config-pmap-p)# 

max-forwards-validation action {drop | drop-connection | 

reset | log} [log]

e.

To enable check on RTP packets flowing on the pinholes for protocol conformance, enter the 
following command:

hostname(config-pmap-p)# 

rtp-conformance [enforce-payloadtype]

Where the 

enforce-payloadtype

 keyword enforces the payload type to be audio or video based on 

the signaling exchange.

f.

To identify the Server and User-Agent header fields, which expose the software version of either a 
server or an endpoint, enter the following command:

hostname(config-pmap-p)# 

software-version action {mask | log} [log]

Where the 

mask

 keyword removes the SIP header containing the software version and the Alert-Info 

and Call-Info header fields in the SIP messages.

g.

To enable state checking validation, enter the following command:

hostname(config-pmap-p)# 

state-checking action {drop | drop-connection | reset | log} 

[log]

h.

To enable strict verification of the header fields in the SIP messages according to RFC 3261, enter 
the following command:

hostname(config-pmap-p)# 

strict-header-validation action {drop | drop-connection | 

reset | log} [log]

Note

To send a TCP reset from the universal access concentrator (UAC) to the user agent server (UAS) 
when there is a violation in SIP message header, you must configure the 

service resetinbound

 

command in addition to entering the 

reset log

 keywords for the 

strict-header-validation

 

command. 

When the security level is different on the inside and outside interfaces, the reset is sent to the 
inside host only. To send the reset to the outside, you must configure the 

service resetinbound

 

command and enter the 

reset log

 keywords for the 

strict-header-validation

 command.

i.

To allow non SIP traffic using the well-known SIP signaling port, enter the following command. 
Allowing non SIP traffic using the well-known SIP signaling port is enabled by default.

hostname(config-pmap-p)# 

traffic-non-sip 

j.

To identify the presence of SIP headers such as the Alert-Info and Call-Info header fields in SIP 
messages, enter the following command:

hostname(config-pmap-p)# 

uri-non-sip action {mask | log} [log]

The following example shows how to disable instant messaging over SIP:

Summary of Contents for 6500 - Catalyst Series 10 Gigabit EN Interface Module Expansion







































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments