manualshive.com logo in svg

Cisco 6500 - Catalyst Series 10 Gigabit EN Interface Module Expansion, Configuration Manual, Page: 63 / 742

Share
Download
Cisco 6500 - Catalyst Series 10 Gigabit EN Interface Module Expansion Configuration Manual Download Page 63

 

3-5

Catalyst 6500 Series Switch and Cisco 7600 Series Router Firewall Services Module Configuration Guide using ASDM

OL-20748-01

Chapter 3      Connecting to the Firewall Services Module and Managing the Configuration

  Managing the Configuration

•

For contexts that are not saved because of bad sectors in the Flash memory, the following message 
appears:

The context 'context a' could not be saved due to Unknown errors

Copying the Startup Configuration to the Running Configuration

Copy the new startup configuration to the running configuration using one of these options:

•

To merge the startup configuration with the current running configuration, enter the following 
command:

hostname(config)# 

copy startup-config running-config

A merge adds any new commands from the new configuration to the running configuration. If the 
configurations are the same, no changes occur. If commands conflict or if commands affect the 
running of the context, then the effect of the merge depends on the command. You might get errors, 
or you might have unexpected results.

•

To load the startup configuration and discard the running configuration, restart the FWSM by 
entering the following command:

hostname# 

reload

Alternatively, you can use the following commands to load the startup configuration and discard the 
running configuration without requiring a reboot:

hostname(config)# 

clear configure all

hostname(config)# 

copy startup-config running-config

Viewing the Configuration

The following commands let you view the running and startup configurations.

•

To view the running configuration, enter the following command:

hostname# 

show running-config

•

To view the running configuration of a specific command, enter the following command:

hostname# 

show running-config 

command

•

To view the startup configuration, enter the following command:

hostname# 

show startup-config

Clearing and Removing Configuration Settings

To erase settings, enter one of the following commands.

•

To clear all the configuration for a specified command, enter the following command:

hostname(config)# 

clear configure 

configurationcommand

 [

level2configurationcommand

]

Summary of Contents for 6500 - Catalyst Series 10 Gigabit EN Interface Module Expansion







































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments