Cerio OW-200N2, User Manual

Page: 81 / 290

User’s Manual
500mW eXtreme Power 11Na Outdoor Bridge
81
„
Bridge table information : Select “ Bridge Table information ” on the drop-down list to display bridge table.
Bridge table will show Bridge ID and STP's Status on the each Ethernet bridge and its attached
interfaces, the Bridge Port should be attached to some interfaces e.g. ra0 ~ra6 and wds0~wds3).
„
Bridge MAC information : Select “ Bridge MACs Information ” on the drop-down list to display MAC table.
This table displays local MAC addresses associated with wired or wireless interfaces, but also remember
non-local MAC addresses learned from wired or wireless interfaces.
Ageing timers will be reset when existing MAC addresses in table are learned again or added
when new MAC addresses are seen from wired or wireless interfaces as well. When time runs out
for a particular entry, it will be pruned from the table. In that situation, switching packet to that
particular MAC address will be discontinued.
„
Bridge STP Information : Select “ Bridge STP Information ” on the drop-down list to display a list of bridge
STP information.