Cerio OW-200N2, User Manual

Page: 205 / 290

User’s Manual
500mW eXtreme Power 11Na Outdoor Bridge
205
Î
Click “” Edit ” an exist profile on the Profile List. The field of System Configuration and Security Policy will
display profile's content. Edit profile's content and then click “ Save ” button to save the profile.
Î
Click “ Delete ” to remove profile.
Î
Click and Select a profile from list, then click the “ Connect ” button to connecting to the wireless network with
the profile setting. After clicking “Connect” button, you can verify connecting status on Remote AP Page
If tuen on IEEE802.11H and OW-200N2 connect AP with DFS channel 52-150, OW-200N2 Will have 60 sec to do
channel available check, and will not send beacon and can not be connect.
Change these settings as described here and click Save button to save your changes. Click Reboot button to
activate your changes