Cerio OW-200N2, User Manual

Page: 176 / 290

User’s Manual
500mW eXtreme Power 11Na Outdoor Bridge
176
Select “Enable”, all clients will be isolated from each other, which means they
can’t reach each other.
6.7.1.3 Hidden SSID : By default, it’s “ Disable ”.
Enable this option to stop the SSID broadcast in your network. When disabled,
people could easily obtain the SSID information with the site survey software
and get access to the network if security is not turned on. When enabled,
network security is enhanced. It’s suggested to enable it after AP security
settings are archived and setting of AP clients could make to associate to it.
6.7.1.4 Maximum Clients : The default value is 32 .
You can enter the number of wireless clients that can associate to a particular
SSID. When the number of client is set to 5, only 5 clients at most are allowed
to connect to this VAP.
6.7.2 Security Type : Select the desired security type from the drop-down list; the options
are Disable , WEP , WPA-PSK , WPA2-PSK , WPA-Enterprise , WPA2-Enterprise and
WEP 802.1X .
6.7.2.1 Disable : Data are unencrypted during transmission when this option is
selected.
6.7.2.2 WEP : Wired Equivalent Privacy(WEP) is a data encryption mechanism
based on a 64-bit or 128-bit shared key.
z Authentication Method : Enable the desire option among OPEN, SHARED
or WEPAUTO.
z Key Index : Skey index is used to designate the WEP key during data
transmission. 4 different WEP keys can be entered at the same time, but only
one is chosen.
z WEP Key # : Enter HEX or ASCII format WEP key value; the system
supports up to 4 sets of WEP keys.