Cerio OW-200N2 User Manual Download Page 243

Page: 243 / 290

User’s Manual

500mW eXtreme Power 11Na Outdoor Bridge

243

Channel :

The current channel on the Wireless port.

AP Rate :

The current Bit Rate on the Repeater AP.

Station Rate :

The current Bit Rate on the Wireless Client Station.

Receive bytes :

The total received packets in bytes on the Wireless port.

Receive packets :

The total received packets on the Wireless port.

Transmit bytes :

The total transmitted packets in bytes on the Wireless port.

Transmit packets :

The total transmitted packets on the Wireless port.

DHCP Server Status :

Users could retrieve DHCP server and DHCP clients’ IP/MAC address via this field.

IP Address :

IP addresses to LAN devices by DHCP server.

MAC Address :

MAC addresses of LAN devices.

Expired In :

Shows how long the leased IP address will expire.

Summary of Contents for OW-200N2



































































































































































































































































































Search results

Summary of Contents for OW-200N2

Reviews:

Related manuals for OW-200N2

Brands by name

Popular brands

Cerio OW-200N2, User Manual

Search results

Summary of Contents for OW-200N2

Reviews:

Related manuals for OW-200N2

Brands by name

Popular brands