Cerio OW-200N2, User Manual

Page: 69 / 290

User’s Manual
500mW eXtreme Power 11Na Outdoor Bridge
69
rule. There are 10 MAC address maximum allowed in each rule.
Î
Local / Destination IP : Specify local(LAN)/ destination IP addresses range required for this rule. If you
specify local IP addresses range from 192.168.1.1 to 192.168.2.254. The matches a range of local IP
addresses include every single IP address from the first to the last, so the example above includes
everything from 192.168.1.1 to 192.168.2.254.
Î
DSCP Class : Differentiated services code point, DSCP. Select Any or specify classify traffic from drop-down
list.
The Per-Hop Behavior (PHB) is indicated by encoding a 6-bit value—called the Differentiated Services
Code Point (DSCP)—into the 8-bit Differentiated Services (DS) field of the IP packet header. Below depicts
class for DSCP.
9
BE : Default PHB, which is typically best-effort traffic
9
EF : Expedited Forwarding PHB, dedicated to low-loss, low-latency traffic
9
AF : Assured Forwarding PHB, which gives assurance of delivery under conditions. The AF behavior
group defines four separate AF classes. Within each class, packets are given a drop precedence (high,
medium or low). The combination of classes and drop precedence yields twelve separate DSCP
encodings from AF11 through AF43 (see table)
9
DROP Precedence Class 1 Class 2 Class 3 Class 4
Low Drop AF11 AF21 AF31 AF41
Medium Drop AF12 AF22 AF32 AF42
High Drop AF13 AF23 AF33 AF43
Î
Protocol : Select Any or specify protocol from drop-down list. When you select ICMP or Layer 7
Application , the Source/ Destination Port can not used.
Î
Local Port : Specify local port(LAN port) range required for this rule