Cerio OW-200N2, User Manual

Page: 270 / 290

User’s Manual
500mW eXtreme Power 11Na Outdoor Bridge
270
10.4.3 Bridge table information : Select “Bridge Table information” on the drop-down list
to display bridge table.
Bridge table will show Bridge ID and STP's Status on the each Ethernet bridge and its
attached interfaces, the Bridge Port should be attached to some interfaces (e.g. eth2,
ra0~ra7 and wds0~wds3).
10.4.4 Bridge MAC information :
Select “Bridge MACs Information” on the drop-down list to display MAC table.
This table displays local MAC addresses associated with wired or wireless interfaces,
but also remember non-local MAC addresses learned from wired or wireless
interfaces.
Ageing timers will be reset when existing MAC addresses in table are learned again
or added when new MAC addresses are seen from wired or wireless interfaces as
well. When time runs out for a particular entry, it will be pruned from the table. In that
situation, switching packet to that particular MAC address will be dropped.