Cerio OW-200N2 User Manual Download Page 189

Page: 189 / 290

User’s Manual

500mW eXtreme Power 11Na Outdoor Bridge

189

7.1.3

Configure DDNS Setup

Dynamic DNS allows you to map domain name to dynamic IP address.

Please click on

System -> DDNS Setup

and follow the below setting.

Enabled:

By default, it’s “

Disable

”

The mapping domain name won’t change when dynamic IP changes. The

beauty of it is no need to remember the dynamic WAP IP while accessing to it.

Service Provider:

Select the preferred Service Provider from the drop-down list including

dyndns

dhs

ods

and

tzo

Hostname:

Host Name that you register to Dynamic-DNS service and export.

User Name & Password:

User Name and Password are used to login DDNS service.

Click

Save

button to save your changes. Click

Reboot

button to activate your changes

Summary of Contents for OW-200N2



































































































































































































































































































Search results

Summary of Contents for OW-200N2

Reviews:

Related manuals for OW-200N2

Brands by name

Popular brands

Cerio OW-200N2, User Manual

Search results

Summary of Contents for OW-200N2

Reviews:

Related manuals for OW-200N2

Brands by name

Popular brands