Cerio OW-200N2, User Manual

Page: 245 / 290

User’s Manual
500mW eXtreme Power 11Na Outdoor Bridge
245
7.7.3 Remote AP
SSID, MAC address, antenna 0/1 received signal strength and channel bandwidth for associated AP are available.
„
ESSID : Shows the current ESSID, which must be the same on the wireless client and AP in order for
communication to be established.
„
MAC Address : Display MAC address of associated AP.
„
Signal Strength ANT0/ANT1 : Shows the wireless signal strength of the connection between system and an
access point.
„
BandWidth : Shows the current channel bandwidth used for communication. It should be “20” or “40”
If display “ No Connection AP! ” , you need check Wireless configuration. Things to verify are Channel and
Security type. Also , adjust antenna angle and Tx Power.