Cerio OW-200N2, User Manual

Page: 32 / 290

User’s Manual
500mW eXtreme Power 11Na Outdoor Bridge
32
„
Band Mode : Select an appropriate wireless band; bands available are 801.11a or 802.11a/n mixed mode .
„
AP Isolation : Select Enable , all clients will be isolated from each VAP, that means different VAP's clients can
not reach to each other.
„
Transmit Rate Control : Select the desired rate from the drop-down list; the options are auto or ranging from 6
to 54Mbps only for 802.11a mode.
„
Country : Select the desired country code from the drop-down list; the options are US , ETSI , JP and NONE .
„
Channel/Frequency : The channel range will be changed by selecting different country code. Below depicts the
channel range for different Country .
Country Channel
US 36, 40, 44, 48, 52, 56, 60, 64, 149, 153, 157, 161
ETSI 36, 40, 44, 48, 52, 56, 60, 64, 100, 104, 108, 112, 116, 120, 124, 128, 132, 136, 140
JP 36, 40, 44, 48
NONE 36, 40, 44, 48, 52, 56, 60, 64, 100, 104, 108, 112, 116, 120, 124, 128, 132, 136, 140, 149, 153, 157, 161
„
Tx Power : You can adjust the output power of the system to get the appropriate coverage for your wireless
network. Specify digit numbers between 1 to 100 (the unit is %) for your environment. If you are not sure which
setting to choose, then keep the default setting, 100 %.
When Band Mode select in 802.11a only mode , the HT(High Throughput) settings should be hidden immediately.
„
HT TxStream / RxStream : By default, it's 2 .
„
Operating Mode : By default, it's Mixed Mode.
Î
Mixed Mode : In this mode packets are transmitted with a preamble compatible with the legacy 802.11a/g,
the rest of the packet has a new format. In this mode the receiver shall be able to decode both the Mixed
Mode packets and legacy packets.
Î
Green Field : In this mode high throughput packets are transmitted without a legacy compatible part.
„
Channel Bandwidth : The " 20/40 ” MHz option is usually best. The other option is available for special