Cerio OW-200N2, User Manual

Page: 27 / 290

User’s Manual
500mW eXtreme Power 11Na Outdoor Bridge
27
9
IP Address : The IP address of the WAN port
9
IP Netmask : The Subnet mask of the WAN port
9
PPTP Server IP Address : The IP address of the PPTP server
9
User Name : Enter User Name for PPTP connection
9
Password : Enter Password for PPTP connection
9
Reconnect Mode :
• Always on – A connection to Internet is always maintained.
• On Demand – A connection to Internet is made as needed.
When Time Server is enabled at the “On Demand” mode, the “Reconnect Mode” will turn out “Always on”.
• Manual – Click the “ Connect ” button on “ WAN Information ” in the Overview page to connect to
the Internet.
9
Idle Time : Time to last before disconnecting PPPoE session when it is idle. Enter preferred Idle Time in
minutes. Default is “ 0 ”, indicates disabled. When Idle time is disabled, the “ Reconnect Mode ” will turn
out “ Always on ”
9
MTU : By default, it’s 1460 bytes. MTU stands for Maximum Transmission Unit. Consult with WISP for a
correct MTU setting.
9
MPPE Encryption : Microsoft Point-to-Point Encryption (MPPE) encrypts data in Point-to-Point
Protocol(PPP)-based dial-up connections or Point-to-Point Tunneling Protocol (PPTP) virtual private
network (VPN) connections. 128 - bit key (strong) and 40 - bit key (standard) MPPE encryption schemes
are supported. MPPE provides data security for the PPTP connection that is between the VPN client
and the VPN server.