Cerio OW-200N2, User Manual

Page: 175 / 290

User’s Manual
500mW eXtreme Power 11Na Outdoor Bridge
175
Notice: Before you click “ Connect ” button for connection, Please double check
the “ Channel ” setting of “Wireless General Setup” page on OW-200N2 as it must
be the same with associated AP channel setting
Notice: If you only click “Connect” button and does not click “Save” button. The
selected profile would not be saved on the Profile List
Change these settings as described here and click Save button to save your changes.
Click Reboot button to activate your changes.
6.7 Wireless LAN Network Creation
The network manager can configure related wireless settings, AP Setup , Security
Settings , and Access Control Settings .
6.7.1 Repeater AP Setup
Administrators can configure ESSID, VLAN tag(ID), SSID broadcasting, Maximum
number of client associations, security type settings and MAC Filter settings.
6.7.1.1 ESSID : Extended Service Set ID, When clients are browsing for available
wireless networks, this is the SSID that will appear in the list. ESSID will
determine the service type available to AP clients associated with the specified
VAP.
6.7.1.2 Client Isolation : By default, it’s “ Disable ”.