Cerio OW-200N2, User Manual

Page: 261 / 290

User’s Manual
500mW eXtreme Power 11Na Outdoor Bridge
261
9.3 Network Utility
The administrator can diagnose network connectivity via the PING or TRACEROUTE
utility. Please click on
Utilities -> Network Utility and follow the below setting.
9.3.1 Ping : This utility will help ping other devices on the network to verify connectivity.
Ping utility, using ICMP packets, detects connectivity and latency between two
network nodes. As result of that, packet loss and latency time are available in the
Result field while running the PING test.
9.3.1.1 Destination IP/Domain : Enter desired domain name, i.e.
www.google.com, or IP address of the destination, and click ping button to
proceed. The ping result will be shown in the Result field.
9.3.1.2 Count : By default, it’s 5 and the range is from 1 to 50. It indicates number
of connectivity test.
9.3.2 Traceroute : Allows tracing the hops from the OW-200N2 device to a selected
outgoing IP address. It should be used for the finding the route taken by ICMP
packets across the network to the destination host. The test is started using the
Start
button, click Stop button to stopped test.
9.3.2.1 Destination Host : Specifies the Destination Host for the finding the route
taken by ICMP packets across the network.
9.3.2.2 MAX Hop : Specifies the maximum number of hops( max time-to-live value)
traceroute will probe.