Cerio OW-200N2, User Manual

Page: 193 / 290

User’s Manual
500mW eXtreme Power 11Na Outdoor Bridge
193
Mode packets and legacy packets.
Î
Green Field : In this mode high throughput packets are transmitted without a legacy compatible part.
„
Channel Bandwidth : The " Auto ” MHz option is usually best. The other option is available for special
circumstances.
„
Guard Interval : Using “ Auto ” option can increase throughput. However, it can also increase error rate in some
installations, due to increased sensitivity to radio-frequency reflections. Select the option that works best for your
installation.
„
MCS : This parameter represents transmission rate. By default (Auto) the fastest possible transmission rate will
be selected. You have the option of selecting the speed if necessary. (Refer to Appendix C. MCS Data Rate )
„
MPDU Enable : Check Enable button to activate this function, and Disable to deactivate.
„
A-MPDU : A-MPDU (Aggregated Mac Protocol Data Unit) allows the transmissions of multiple Ethernet frames to
a single location as burst of up to 64kbytes This is performed on the hardware itself. Select “Manual” to set
“MPDU Density”
„
MPDU Density : Minimum separation of MPDUs in an A-MPDU.
0 1 2 3 4 5 6 7
No Restriction ¼ µs ½ µs 1 µs 2 µs 4 µs 8 µs 16 µs
„
A-MSDU : Aggregated Mac Service Data Unit, A-MSDU. Select Enable to allows aggregation for multiple
MSDUs in one MPDU. Default is disabled.
Click Save button to save your changes. Click Reboot button to activate your changes.