Cerio OW-200N2, User Manual

Page: 90 / 290

User’s Manual
500mW eXtreme Power 11Na Outdoor Bridge
90
JP 36, 40, 44, 48
None
36, 40, 44, 48, 52, 56, 60, 64, 100, 104, 108, 112, 116, 120, 124, 128,
132, 136, 140, 149, 153, 157, 161
3.4.1.7 Tx Power : You can adjust the output power of the system to get the
appropriate coverage for your wireless network. Specify digit numbers between
1 to 100 (the unit is %) for your environment. If you are not sure which setting
to choose, then keep the default setting, 60%.
3.4.2 When Band Mode select in 802.11a/n mixed mode , the HT(High Throughput)
settings should be shown-up immediately.
3.4.2.1 HT TxStream/RxStream : By default, it's 2.
3.4.3 HT Physical Mode : By default, it's Mixed Mode.
3.4.3.1 Mixed Mode : In this mode packets are transmitted with a preamble
compatible with the legacy 802.11a/g, the rest of the packet has a new format.
In this mode the receiver shall be able to decode both the Mixed Mode packets
and legacy packets.
3.4.3.2 Green Field : In this mode high throughput packets are transmitted without
a legacy compatible part.
3.4.4 Channel Bandwidth : The "20/40” MHz option is usually best. The other option is
available for special circumstances.
3.4.5 Guard Interval : Using “Auto” option can increase throughput. However, it can also