Cerio OW-200N2, User Manual

Page: 80 / 290

User’s Manual
500mW eXtreme Power 11Na Outdoor Bridge
80
drop-down list from system. The “Refresh” button is used to retrieve latest table information.
„
Netstat Information : Select “ NetStatus Information ” on the drop-down list, the connection track list should
show-up, the list can be updated using the Refresh button.
NetStatus will show all connection track on the system, the information include Protocol , Live
Time , Status , Source/Destination IP address and Port .
„
Route table information : Select “ Route table information ” on the drop-down list to display route table.
OW-200N2 could be used as a L2 or L3 device. It doesn’t support dynamic routing protocols
such as RIP or OSPF. Static routes to specific hosts, networks or default gateway are set up
automatically according to the IP configuration of system's interfaces. When used as a L2 device,
it could switch packets and, as L3 device, it’s capable of being a gateway to route packets inward
and outward.
„
ARP table Information : Select “ ARP Table Information ” on the drop-down list to display ARP table.
ARP associates each IP address to a unique hardware address (MAC) of a device. It is
important to have a unique IP address as final destination to switch packets to.