Cerio OW-200N2, User Manual

Page: 79 / 290

User’s Manual
500mW eXtreme Power 11Na Outdoor Bridge
79
Î
Idle Time : Last inactive time period in seconds for a wireless connection.
Î
Connect Time : Total connection time period in seconds for a wireless connection.
Î
Disconnect : Click “ Delete ” button to manually disconnect a wireless client in a Virtual AP.
2.7.3 Show WDS Link Status
Peers MAC Address, antenna 0/1 received signal strength, phy mode and channel bandwidth for each WDS are
available.
„
MAC Address : Display MAC address of WDS peer.
„
Signal Strength ANT0/ANT1 : Indicate the signal strength of the respective WDS links.
„
Phy Mode : Indicate the phy mode of the respective WDS linked.
„
BandWidth : Indicate the channel bandwidth of the respective WDS linked.
„
MCS : Indicate the MCS of the respective WDS linked.
„
SGI : Indicate the SGI (Short Guard Interval) of the respective WDS linked. “1” indicate the Short Guard Interval,
“0” indicate the Long Guard Interval.
If display “ no signal ” Signal Strength ANT0/ANT1, you need check WDS configuration. Things to verify are MAC
Address , Channel and Security type. Also , adjust antenna angle and Tx Power.
2.7.4 Extra Info
Users could pull out information such as Route table, ARP table, MAC table, Bridge table or STP available in the