Cerio OW-200N2, User Manual

Page: 104 / 290

User’s Manual
500mW eXtreme Power 11Na Outdoor Bridge
104
B. Group Key Update Period : By default, it’s 3600 seconds. This time
interval for rekeying GTK, broadcast/multicast encryption keys, in
seconds. Entering the time-length is required.
C. PMK Cache Period : By default, it's 10 minutes. Set WPA2 PMKID
cache timeout period, after time out, the cached key will be deleted.
D. Pre-Authentication : By default, it's “Disable”. To Enable is use to speed
up roaming before pre-authenticating IEEE 802.1X/EAP part of the full
RSN authentication and key handshake before actually associating with
a new AP.
Notice: PMK Cache Period and Pre-Authentication is used in WPA2-Enterprise
z Authentication Radius Server Settings :
A. IP Address : Enter the IP address of the Authentication RADIUS server.
B. Port : By default, it’s 1812. The port number used to communicate with
RADIUS server.
C. Shared secret : A secret key used between system and RADIUS server.
Supports 8 to 64 characters.
D. Session Timeout : The Session timeout is in the range of 0~60 seconds.
The default is 0 to disable re-authenticate service.
Amount of time before a client will be required to re-authenticate.
3.6.3.5 WEP 802.1X : When WEP 802.1x Authentication is enabled, please refer
to the following Dynamic WEP and RADIUS settings to complete configuration.
z Radius Server Settings :
A. IP Address : Enter the IP address of the Authentication RADIUS server.
B. Port : By default, it’s 1812. The port number used to communicate with