Cerio OW-200N2, User Manual

Page: 269 / 290

User’s Manual
500mW eXtreme Power 11Na Outdoor Bridge
269
10.4 Extra Information
Users could pull out information such as Route table, ARP table, MAC table, Bridge table
or STP available in the drop-down list from system. The “Refresh” button is used to
retrieve latest table information.
10.4.1 Route table information : Select “Route table information” on the drop-down list to
display route table.
OW-200N2 could be used as a L2 or L3 device. It doesn’t support dynamic routing
protocols such as RIP or OSPF. Static routes to specific hosts, networks or default
gateway are set up automatically according to the IP configuration of system's
interfaces. When used as a L2 device, it could switch packets and, as L3 device, it’s
capable of being a gateway to route packets inward and outward.
10.4.2 ARP table Information : Select “ARP Table Information” on the drop-down list to
display ARP table.
ARP associates each IP address to a unique hardware address (MAC) of a device. It
is important to have a unique IP address as final destination to switch packets to.