Cerio OW-200N2 User Manual Download Page 242

Page: 242 / 290

User’s Manual

500mW eXtreme Power 11Na Outdoor Bridge

242

Secondary DNS :

The secondary DNS server in service.

LAN Information :

Display total received and transmitted statistics on the LAN interface.

MAC Address :

The MAC address of the LAN port.

IP Address :

The IP address of the LAN port.

IP Netmask :

The IP netmask of the LAN port.

Receive bytes :

The total received packets in bytes on the LAN port.

Receive packets :

The total received packets of the LAN port.

Transmit bytes :

The total transmitted packets in bytes of the LAN port.

Transmit packets :

The total transmitted packets of the LAN port.

Wireless Information :

Display the detailed receive and transmit statistics of Wireless interface.

AP MAC Address :

The MAC address of the Repeater AP.

Station MAC Address :

The MAC address of the Wireless Client Station.

Summary of Contents for OW-200N2



































































































































































































































































































Search results

Summary of Contents for OW-200N2

Reviews:

Related manuals for OW-200N2

Brands by name

Popular brands

Cerio OW-200N2, User Manual

Search results

Summary of Contents for OW-200N2

Reviews:

Related manuals for OW-200N2

Brands by name

Popular brands