Cerio OW-200N2, User Manual

Page: 12 / 290

User’s Manual
500mW eXtreme Power 11Na Outdoor Bridge
12
1.4 Product Benefit
1.4.1 IEEE 802.11n Draft 2.0 Compliance in 2Tx / 2Rx Design
1.4.2 Support IEEE 802.11n and 802.11a
1.4.3 Operates in the 5GHz ISM Band
1.4.4 Enables Bandwidth of up to 300Mbps(Tx), 300Mbps(Rx) link rate
1.4.5 Topology : Point to Point ; Point to Multi Point
1.4.5.1 Router AP Mode
1.4.5.2 Access Point Mode: Pure Access Point Function and Access Point
/Bridge(WDS) Function
1.4.5.3 WDS Mode
1.4.5.4 CPE Mode (Router Client )
1.4.5.5 Client Universal Repeater Mode
1.4.5.6 CPE + AP Mode
1.4.6 Security with 802.1X, WPA, and WPA2
1.4.7 Support QoS(Quality of Service) & WMM
1.4.8 Integrated Power over Ethernet (PoE)
1.4.9 Multiple Virtual AP & Capability of Client Isolation
1.4.10 Business-class WLAN Security and Client Authentications
1.4.11 Provide Advanced Wireless Setting
1.4.12 Support Web Management and SNMP MIB II
1.4.13 Over Load Current Protection
1.4.14 Wide Range Voltage Support (12-68VDC)
1.4.15 Weather-Proof Housing (IP 68 Approved), M-13 RJ45 and N-Type Connector
1.4.16 Client Isolation Through Layer 2 VLAN Technology
1.4.17 Two administrator accounts for manager authorities
1.4.18 QoS for bandwidth management and traffic prioritization
1.5 Package Contents
1.5.1 OW-200N2 Main Unit x 1
1.5.2 PoE-S48V: Fast Ethernet PoE Injector Switching Power Supply x 1
1.5.3
Wall / Pole Mounting Bracket x 1
1.5.4 CD manual x 1
1.5.5 Warranty Card x 1
1.5.6 Mounting Kit (Device Holder / Screws) x 2