Cerio OW-200N2, User Manual

Page: 124 / 290

User’s Manual
500mW eXtreme Power 11Na Outdoor Bridge
124
4.4.2 WMM : By default, it's “ Disable ”. To Enable is to use WMM and the WMM
parameters should appears.
Notice: When you enable WMM, the “Tx Burst” will be Disabled automatically by
system.
4.4.3 WMM Parameters of Access Point : This affects traffic flowing from the access point
to the client station.
Configuring QoS options consists of setting parameters on existing queues for
different types of wireless traffic. You can configure different minimum and maximum
wait times for the transmission of packets in each queue based on the requirements
of the media being sent. Queues automatically provide minimum transmission delay
for Voice, Video, multimedia, and mission critical applications, and rely on best-effort
parameters for traditional IP data.
As an Example, time-sensitive Voice & Video, and multimedia are given effectively
higher priority for transmission (lower wait times for channel access), while other
applications and traditional IP data which are less time-sensitive but often more
data-intensive are expected to tolerate longer wait times.
Queue
Data
Transmitted
AP to Clients
Priorit
y
Description