manualshive.com logo in svg

Canon VarioPrint MICR i Series, Operation Manual

Share
Download
Canon VarioPrint MICR i Series Operation Manual Download Page 264

Configure the sleep mode

When you do not operate the printer, you can reduce the energy consumption with the 

sleep

mode

. The sleep mode is activated when you press the sleep button   or when the 

sleep-mode

timer

 expires. During the sleep mode PRISMAsync Print Server and the control panel are on,

while the print engine and the attached modules are switched off. It depends on the sleep mode
configuration if the printer responds to new print jobs.
1. Open the Settings Editor and go to: [Preferences]

→

[System settings]

→

[Energy save modes].

[312] [System settings] tab

2. Use the [Sleep mode timer enabled] function to enable the sleep mode.

[313] Sleep mode

3. Use the [Sleep mode timer] function to set the sleep mode timer.

[314] Sleep mode timer

4. Use the [Wake up when new jobs arrive] function to define if the sleep mode must be left for

a new print job.

[315] Wake up for new jobs

More information

•

Learn about energy save modes on page 258

•

Configure automatic wake-up on page 265

Configure the sleep mode

264

Chapter 9 - Save energy

VarioPrint i-series MICR

Summary of Contents for VarioPrint MICR i Series

































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands