manualshive.com logo in svg

Canon VarioPrint MICR i Series, Operation Manual

Share
Download
Canon VarioPrint MICR i Series Operation Manual Download Page 221

2. Select one of the following options:

• [All]: to print the complete page or record range.
• [Page range]: to print a part of the source file pages. Then, enter the first and last page.
• [Record range]: to print a record range of a variable data job. Then, enter the first and last

record.

3. Touch [OK].

Change the job name

The job name is the name of the job that has been defined during job preparation. You can
change the name. When the long job name is enabled, the job name is displayed on two lines.

1. In the [Job] settings, touch [Job name].

Change job name, number of sets or print range

Chapter 8 - Document printing

221

VarioPrint i-series MICR

Summary of Contents for VarioPrint MICR i Series

































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands