manualshive.com logo in svg

Canon VarioPrint MICR i Series, Operation Manual

Share
Download
Canon VarioPrint MICR i Series Operation Manual Download Page 344

Create composite output profiles

This topic contains the following instructions.
• Import a production profile or simulation profile
• Create a composite output profile
• Create a Device Link profile

Which composite output profiles can you create

When you use device simulation one or more output profiles of the simulated printer are used to
translate the input color data into the CMYK color space of the printer.

PRISMAsync Print Server can create composite output profiles in several ways.
• Using a VarioPrint i-series MICR printer output profile and the output profile of the target

printer (

production profile

).

• Using a VarioPrint i-series MICR printer output profile, the output profile of the target printer

(

production profile

) and a 

simulation profile

 of the target printer.

• Using the output profile of the target printer (

production profile

) and a 

Device Link

 of the target

printer.

Import a production profile or simulation profile

1. Open the Settings Editor and go to: [Color]

→

[Input profiles].

[417] [Input profiles] tab

2. Click [Import].
3. The [Import input profile] dialog box appears.
4. Browse to the output profile of the target printer.
5. Enter a unique name and description.

[418] Import a production profile

6. Click [OK].
7. The profile is added to the list.

Create composite output profiles

344

Chapter 11 - Manage color definitions

VarioPrint i-series MICR

Summary of Contents for VarioPrint MICR i Series

































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands