Canon VarioPrint MICR i Series Operation Manual Download Page 254

Page: 254 / 576

[305] Print files on a USB device

1. Insert the USB device into the USB port at the left-hand side of the control panel.
2. Touch [Jobs]

→

[USB].

3. Touch the directory that stores the files, if needed.
4. Select one or more jobs.
5. Touch [Print] to move the job to the list of scheduled jobs.

Touch [Save] to move the job to the list of waiting jobs.

6. Touch the eject button and remove the USB device.

More information

•

Find, select, and filter jobs on page 189

•

Define storage of printed jobs on page 73

Print a job

254

Chapter 8 - Document printing

VarioPrint i-series MICR

Summary of Contents for VarioPrint MICR i Series

































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for VarioPrint MICR i Series

Reviews:

Brands by name

Popular brands

Canon VarioPrint MICR i Series, Operation Manual

Search results

Summary of Contents for VarioPrint MICR i Series

Reviews:

Brands by name

Popular brands