manualshive.com logo in svg

Canon VarioPrint MICR i Series, Operation Manual

Share
Download
Canon VarioPrint MICR i Series Operation Manual Download Page 384

• When you touch the summary area, you see more information. Every measured patch of both

calibration charts are represented in the 

heatmap

. The heatmap indicates how accurate the

measurements of the patches were performed.

When the feedback shows that the measurements were not accurate enough according to the
configured tolerance levels, perform the media family calibration again.

Read the measurement accuracy in the heatmap

The heatmap patches are green, red, or have a gradient between green and red. In this way the
color makes visible which patches are correctly, incorrectly or suspiciously measured. The
tolerance levels set for the media family calibration determine when patches turn red and green.

1. Touch the summary information. The heatmap appears.

2. Touch the 

>

 and 

<

 symbols to scroll through the calibration charts. Use the zoom symbol to

zoom in or out.

Examine patches of the heatmap

In this example, the heatmap shows green, orange, and red patches. The patch contains more
details about the measured colors, the reference colors, and the color differences.
1. Use the zoom symbol to zoom into a detail of the heatmap.

Read media family calibration feedback

384

Chapter 12 - Print what you expect

VarioPrint i-series MICR

Summary of Contents for VarioPrint MICR i Series

































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands