manualshive.com logo in svg

Canon VarioPrint MICR i Series, Operation Manual

Share
Download
Canon VarioPrint MICR i Series Operation Manual Download Page 176

[Finishing] attributes

Description

[Feed edge]

Select the orientation of the prints in the output tray.

[Header orientation]

Select the header orientation of the prints in the output tray.

[Offset stacking]

Indicate if the stacking occurs with or without an offset.

[Offset after N sets]

Indicate if a group of sets is delivered with an offset. N means the
number of sets in a group.

[Print quality] attributes

Description

[Image smoothing]

Use the this function to prevent unsmooth lines and image blocks
in the document. This occurs when source objects have a lower
resolution than the printer. The [Image smoothing] interpolation
method only affects images below 300 dpi.

[Moiré reduction for im-
ages]

Use the this function to apply a Moiré reduction algorithm to en-
hance photographic images. Please note that when images have a
resolution below 300 dpi, the Moiré reduction only takes effect
when the [Image smoothing] function is enabled.

[Trapping preset]

Select a trapping preset.

[Color] attributes

Description

[Color preset]

Select a color preset. (

Define a color preset on page 305

)

[Color and information bars] and [Workflow] attributes (4)

[214] [Color and information bars] and [Workflow] attributes (4)

Define the attributes of an automated workflow

176

Chapter 8 - Document printing

VarioPrint i-series MICR

Summary of Contents for VarioPrint MICR i Series

































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands