manualshive.com logo in svg

Canon VarioPrint MICR i Series, Operation Manual

Share
Download
Canon VarioPrint MICR i Series Operation Manual Download Page 48

[25] Remote printer driver

The table below describes the main parts of the printer driver and their functions. Use the online
help of the printer driver when you need more information.

Parts

Description

1

Printer configuration

Finishing options of the printer. When the printer is not avail-
able for printing, the printer icon turns red.

Available media

Media that are currently assigned to the paper trays.

Printer status

Status of the printer.

2

Job name

The job name is taken over from the application.

3

Page preview: scrolling

Use the 

 icon to scroll through the document pages.

4

Document size and orienta-
tion

The document size and orientation are taken over from the
application.

5

Page preview: type of view

Use the 

sheet view

 ( ) or the 

document view

 ( ).

6

Job properties

The job properties are equal to the job properties on the con-
trol panel.

7

Job destination, workflow,
and output delivery options

The job is submitted to the print queue on the printer. After
printer the prints come in one of the output trays. The job can
be submitted with the job properties of an automated work-
flow.

4

Interfaces to access the printer

48

Chapter 4 - Getting started

VarioPrint i-series MICR

Summary of Contents for VarioPrint MICR i Series

































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands