manualshive.com logo in svg

Canon VarioPrint MICR i Series, Operation Manual

Share
Download
Canon VarioPrint MICR i Series Operation Manual Download Page 418

Perform a color validation test

VarioPrint i-series MICR color validation tests provide an objective method to check the color
reproduction of the printer on the selected media.

You perform the test with media that have been calibrated just before the color validation. The
target charts are printed on these media.

Print cleaning sheets before the test charts

1. Open the Settings Editor and go to: [Color]

→

[Color validation & verification].

[502] [Color validation & verification] tab

2. Click [Configure].

[503] [Color validation tests] menu

3. Use the [Print cleaning sheets before test charts] option to indicate if you want to print

cleaning sheets before the charts are printed.

[504] Configure color validation

Print the target charts

1. Calibrate the media family of the target media.
2. Load and assign approximately 10 sheets of the target media in one of the paper trays.
3. Touch [System]

→

[Media].

4. Select the target media.
5. Touch [Validate].

Perform a color validation test

418

Chapter 12 - Print what you expect

VarioPrint i-series MICR

Summary of Contents for VarioPrint MICR i Series

































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands