manualshive.com logo in svg

Canon VarioPrint MICR i Series, Operation Manual

Share
Download
Canon VarioPrint MICR i Series Operation Manual Download Page 354

Spot color library

The printer provides pre-defined spot color libraries, such as PANTONE libraries and HKS
libraries.

[432] Spot color libraries in the Settings Editor

The Settings Editor can store three types of spot color libraries:
•

Pre-defined spot color libraries,

 with pre-defined spot color definitions.

•

Custom spot color libraries,

 with spot color definitions that have been created on the control

panel or in the Settings Editor.

•

Imported spot color libraries (Named color profiles)

, with spot color definitions stored in an

ICC profile.

In the Settings Editor you can import named spot color profiles and export spot color libraries
that were imported as named spot color libraries.

[433] Custom spot color library

A 

named color profile

 is an ICC profile that contains a list of spot colors names with color values

(Lab or XYZ). When you import a named color profile, the named color profile is added as an
imported spot color library. A named color profile has a standardized file format defined by the
ICC (International Color Consortium).

More information

•

Measure charts with the i1 spectrophotometer on page 389

)

•

Create and edit a spot color in Settings Editor on page 362

•

Create a spot color on the control panel on page 355

•

Define a spot color library on page 368

Learn about spot colors

354

Chapter 11 - Manage color definitions

VarioPrint i-series MICR

Summary of Contents for VarioPrint MICR i Series

































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands