manualshive.com logo in svg

Canon VarioPrint MICR i Series, Operation Manual

Share
Download
Canon VarioPrint MICR i Series Operation Manual Download Page 142

[177] Tray selection for tray-to-tray mode

Define the tray-to-media mapping

You link logical trays (indicated by a number from 1 to 36) to media of the media catalog. The
printer maps the logical tray to the physical paper trays that hold these media. The schedule
shows the media the job uses.

1. Use the [Default media size as in tray] attribute to select which media defines the media size.

2. Use the [Media catalog item] function to select media from the media catalog.
3. Use the [Feed direction] function to select the feed direction of the media.
4. Use the [Media print mode] function to select the media print mode of the selected media.

The option [Use PCL Default] refers to the [Media print mode] function in the list of PCL
attributes.

NOTE

Click [Edit] in the title bar to adjust the attributes in one dialog.

Define the paper tray linking

Input trays that contain the same media as the tray defined for the job are automatically linked.
This means that when one of the paper tray is empty, printing continues from another paper tray
that holds the same media.

Define the attributes of an PCL transaction setup

142

Chapter 7 - Transaction printing

VarioPrint i-series MICR

Summary of Contents for VarioPrint MICR i Series

































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands