manualshive.com logo in svg

Canon VarioPrint MICR i Series, Operation Manual

Share
Download
Canon VarioPrint MICR i Series Operation Manual Download Page 23

Disassemble and modification

WARNING

• Do not remove covers and panels that are fixed to the machine. Some machines have an

electrical component or a laser beam source inside that could cause an electrical shock or
injuries.

• Do not modify the machine, because this can cause a fire, an electrical shock, a malfunction

or injuries.

• If the machine contains a laser, the laser beam source could cause blindness.
• Do not carry out maintenance activities on other components and maintenance materials

than the components and materials that are mentioned in the User Documentation.

• Only instructed and/or skilled persons are allowed to maintain the machine, to avoid any risk

and/or jeopardize given warranties.

• Do not bridge or disable any safety interlock devices.

Repair

CAUTION

• Repairs to the machine must only be carried out by authorized service representatives.

Access to locked areas and areas that can only be opened with special tools is reserved for
authorized service representatives.

Actions in response to troubles

WARNING

• In the event of damage to the covers, power cable or operating elements, or penetration of

fluids or foreign bodies, immediately switch off the power switch, unplug the power cords
and contact your authorized service representative.

CAUTION

• Some areas inside the machine become hot. Do not touch the locations which are labeled

with the ”CAUTION HOT” symbol . Touching these areas can cause injuries.

• In event of a fire or smoke of the machine:

• Poisonous gases can be produced in any fire. They can also result from a fire in this

machine.

• Self-contained breathing apparatus must be worn when fighting fire or smoke emission.

Instructions to this effect should be stored at the fire alarm center and with the local fire
department.

Chapter 2 - Safety and Environment Information

23

VarioPrint i-series MICR

Summary of Contents for VarioPrint MICR i Series

































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands