manualshive.com logo in svg

Canon VarioPrint MICR i Series, Operation Manual

Share
Download
Canon VarioPrint MICR i Series Operation Manual Download Page 266

Configure automatic shutdown

When do you use automatic shutdown

Use 

automatic shutdown

 to reduce the energy consumption during longer periods that the

printer is not active, such as overnight or during weekends.

You define the days and times that the printer automatically shuts down.

The printer leaves the shutdown mode when you press the 

sleep button

  .

IMPORTANT

The printer can only automatically shut down from the sleep mode. Ensure that the printer is in

sleep mode before the configured shutdown time. Therefore:
• The sleep mode timer must have been expired, or
• You must press the sleep button  .

Configure automatic shutdown

1. Open the Settings Editor and go to: [Preferences]

→

[System settings]

→

[Energy save modes].

[319] [System settings] tab

2. Configure the sleep mode timer.
3. Use the [Automatic shutdown] function to enable the automatic shutdown.

[320] Automatic shutdown

4. Set the shutdown times. Indicate for each day if an automatic shutdown occurs. Define the

shutdown time per day.

[321] Automatic shutdown per day

Configure automatic shutdown

266

Chapter 9 - Save energy

VarioPrint i-series MICR

Summary of Contents for VarioPrint MICR i Series

































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands